Choosing A Chain Saw Chain What Is The Meaning Of The Letter In Front Of The Number?

What do the letters on a chainsaw chain mean?

The numbers stamped on a chainsaw chain are an ID code used by the manufacturer to indicate the pitch and gauge measurements of the chain. Pitch and gauge are important dimensions which influence whether or not a chain is compatible with a chainsaw.

What do the numbers on a Husqvarna chain mean?

The first digit in a Husqvarna chainsaw model number refers to the generation or series. There are currently 5 generations of Husqvarna saws: 1,2,3,4,5. For example, the 4 in the Husqvarna 450 means it’s a 4th generation Husky chainsaw.

How do I know what chainsaw chain to buy?

To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.

You might be interested:  What Does Magic Number Mean?

What is the difference between.325 and 3/8 chain?

The three-eighths chain is a beefier saw and better suited to one that has more horsepower. It has larger teeth and a heavier duty chain, so it requires more horsepower to operate correctly. 325-inch chain for those saws between 40 and 60 cc.

How do I identify an Oregon chain?

Chain Number: Each chain should have a manufacturers number stamped into the drive tooth. This can be seen in the image below where the number 21 is stamped. We supply Oregon chains so if your chain is a different make please refer to our conversion chart below for the equivalent Oregon number.

How do I know what size my chainsaw chain is?

You will either be using a round file or a flat file depending on the cutter that you will be sharpening. To be able to know the value of the chain pitch, simply measure the distance between the centers of two adjacent rivets. Divide the value you get by two to get the chain pitch but in millimeters.

What is chain saw pitch?

Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches – 1/4″ is the smallest, 3/8″ is the most popular, and 3/4” is the largest.

What does DL mean on chainsaw chain?

325 for the smaller saws. The. 50 is the kerf of the saw chain. DL most likely stands for the number of Drive Links.

You might be interested:  What Does The Dow Jones Number Mean?

What does the number on a chain mean?

Chain Dimensions Chain types are identified by number; ie. a number 40 chain. The digits to the left indicate the pitch of the chain in eighths of an inch. For example, a number 40 chain would have a pitch of four-eighths of an inch, or 1/2″, and would be of the standard dimensions in width, roller diameter, etc.

How do I identify my Husqvarna chain?

The model number of a Husqvarna chainsaw is printed on the side of the recoil assembly on the unit (eg. 455, 460, 372 XP). Husqvarna chainsaws also have a small metal plate stamped with the model number, part number, and serial number. The plate is typically located in one of four locations.

How many drive links in a 16 inch chain?

A 16″ bar normally requires 66 drive links with.

What is the most common chainsaw chain size?

0.050″ (1.3 mm) and 0.058″ (1.5 mm) are most common, 0.043″ (1.1 mm) and 0.063″ (1.6mm) less common. Pitch and gauge together determine the size of chain. Length is determined by counting the number of drive links, also called drive lugs.

Are all 14 inch chainsaw chains the same?

The size of a chain saw’s chain does not always correspond to the size of the guide bar. Determining the correct size of chain for a chain saw with a 14-inch guide bar involves several factors, including the size of the drive lugs and their distance from each other along the chain.

Leave a Reply

Your email address will not be published. Required fields are marked *